Sign In | Join Free | My phrmg.org
China TOBO STEEL GROUP CHINA logo
TOBO STEEL GROUP CHINA
TOBO ALLOY GROUP TOBO Alloy Group is a mature, steady and energetic high-tech company, specializing in manufacture of high-temperature alloys and corrosion resistant alloys, such as Hastelloy, Haynes,
Verified Supplier

5 Years

Home > Alloy Steel Pipe Fittings >

Alloy Steel Pipe Fittings 2" SCH40 90LR Elbow UNS N04400 Alkaline Salt Resistance

TOBO STEEL GROUP CHINA
Trust Seal
Verified Supplier
Credit Check
Supplier Assessment

Alloy Steel Pipe Fittings 2" SCH40 90LR Elbow UNS N04400 Alkaline Salt Resistance

Brand Name : TOBO

Model Number : Elbow

Certification : SGS/TUV

Place of Origin : China

MOQ : 10

Payment Terms : T/T, Western Union

Supply Ability : 10000 PC/Month

Delivery Time : 5-8 working days

Packaging Details : ply-wooden case

Material : Alloy Steel Pipe Fittings

Shape : round

Connection : forged

Type : Elbow

Application : Connect Pipes, gas, Oil, Water, Industry

Surface treatment : Hot Galvanized, oil, Polish180.320.420, Sand Blasting, sand blast

Color : or as required, oil, Can be customed, black or not, Black

Contact Now

Alloy Steel Pipe Fittings Pipe Fittings 2" SCH40 90LR Elbow UNS N04400 Alkaline Salt Resistance

Alloy 400

* Alloy 400 is slightly magnetic at room temperature.

* This alloy has a long history of use as a corrosion resistant material, dating back to the early 20th century when it was developed as an attempt to use a high copper content nickel ore. The nickel and copper contents of the ore were in the approximate ratio which is now formally specified for the alloy.

Chemical Composition, %

C Mn S Si Ni Cu Fe
.30 max 2.00 max .024 max .50 max 63.0 min 28.0-34.0 2.50 max
  • UNS N04400
  • Other common names: Alloy 40

Monel 400 is a nickel-copper alloy (about 67% Ni – 23% Cu) that is resistant to sea water and steam at high temperatures as well as to salt and caustic solutions. Alloy 400 is a solid solution alloy that can only be hardened by cold working. This nickel alloy exhibits characteristics like good corrosion resistance, good weldability and high strength. A low corrosion rate in rapidly flowing brackish or seawater combined with excellent resistance to stress-corrosion cracking in most freshwaters, and its resistance to a variety of corrosive conditions led to its wide use in marine applications and other non-oxidizing chloride solutions. This nickel alloy is particularly resistant to hydrochloric and hydrofluoric acids when they are de-aerated. As would be expected from its high copper content, alloy 400 is rapidly attacked by nitric acid and ammonia systems.

Monel 400 has great mechanical properties at subzero temperatures, can be used in temperatures up to 1000° F, and its melting point is 2370-2460° F. However, alloy 400 is low in strength in the annealed condition so, a variety of tempers may be used to increase the strength.

In what forms is Monel 400 Available at Mega Mex?

· Sheet

· Plate

· Bar

· Pipe & Tube (welded & seamless)

· Fittings (i.e. flanges, slip-ons, blinds, weld-necks, lapjoints, long welding necks, socket welds, elbows, tees, stub-ends, returns, caps, crosses, reducers, and pipe nipples)

· Wire

What are the characteristics of Monel 400?

· Resistant to seawater and steam at high temperatures

· Excellent resistance to rapidly flowing brackish water or seawater

· Excellent resistance to stress corrosion cracking in most freshwaters

· Particularly resistant to hydrochloric and hydrofluoric acids when they are de-aerated

· Offers some resistance to hydrochloric and sulfuric acids at modest temperatures and concentrations, but is seldom the material of choice for these acids

· Excellent resistance to neutral and alkaline salt

· Resistance to chloride induced stress corrosion cracking

· Good mechanical properties from sub-zero temperatures up to 1020° F

· High resistance to alkalis


Corrosion Resistant Monel 400

Alloy 400 is virtually immune to chloride ion stress corrosion cracking in typical environments. Generally, its corrosion resistance is very good in reducing environments, but poor in oxidizing conditions. It is not useful in oxidizing acids, such as nitric acid and nitrous. Nevertheless, it is resistant to most alkalis, salts, waters, food products, organic substances and atmospheric conditions at normal and elevated temperatures.

This nickel alloy is attacked in sulfur-bearing gases above approximately 700° F and molten sulfur attacks the alloy at temperatures over approximately 500° F.

Monel 400 offers about the same corrosion resistance as nickel but with higher maximum working pressures and temperatures and at a lower cost due to its superior ability to be machined.

In what applications is Monel 400 used?

· Marine engineering

· Chemical and hydrocarbon processing equipment

· Gasoline and freshwater tanks

· Crude petroleum stills

· De-aerating heaters

· Boiler feed water heaters and other heat exchangers

· Valves, pumps, shafts, fittings, and fasteners

· Industrial heat exchangers

· Chlorinated solvents

· Crude oil distillation towers

Alloy Steel Pipe Fittings 2" SCH40 90LR Elbow UNS N04400 Alkaline Salt ResistanceAlloy Steel Pipe Fittings 2" SCH40 90LR Elbow UNS N04400 Alkaline Salt Resistance

Fabrication with Monel 400

Alloy 400 can easily be welded by gas-tungsten arc, gas metal arc or shielded metal arc processes using appropriate filler metals. There is no need for post weld heat treatment, however, thorough cleaning after welding is critical for optimum corrosion resistance, otherwise there is the risk of contamination and embrittlement.

Finished fabrications can be produced to a wide range of mechanical properties when proper control of the amount of hot or cold working and the selection of appropriate thermal treatments is done.

Like most other nickel alloys, Monel 400 is typically tough to machine and will work harden. However, excellent results can e obtained if you make the correct choices for tooling and machining.

Pipe Smls Pipe Welded Tube Smls Tube Welded Sheet/Plate Bar Forging Fitting Wire
B165 B725 B163 B127 B164 B564 B366

Mechanical Properties

Typical room temperature Tensile Properties of Annealed Material

Product Form Condition Tensile (ksi) .2% Yield (ksi) Elongation (%) Hardness (HRB)
Rod & Bar Annealed 75-90 25-50 60-35 60-80
Rod & Bar Cold-Drawn Stress Relieved 84-120 55-100 40-22 85-20 HRC
Plate Annealed 70-85 28-50 50-35 60-76
Sheet Annealed 70-85 30-45 45-35 65-80
Tube & Pipe Seamless Annealed 70-85 25-45 50-35 75 max *

*The ranges shown are composites for various product sizes and therefore are not suitable for specification purposes. Hardness values are suitable for specification purposes provided tensile properties are not also specified.


Product Tags:

2" SCH40 Steel Pipe Fittings

      

90LR Elbow Steel Pipe Fittings

      

UNS N04400 Steel Pipe Fittings

      
 Alloy Steel Pipe Fittings 2" SCH40 90LR Elbow UNS N04400 Alkaline Salt Resistance Manufactures

Alloy Steel Pipe Fittings 2" SCH40 90LR Elbow UNS N04400 Alkaline Salt Resistance Images

Inquiry Cart 0
Send your message to this supplier
 
*From:
*To: TOBO STEEL GROUP CHINA
*Subject:
*Message:
Characters Remaining: (0/3000)